價格：免費
更新日期：2018-02-16
檔案大小：2.3M
目前版本：1.0
版本需求：Android 4.0.3 以上版本
官方網站：https://www.hdhprojects.nl/
Email：hdh351980@gmail.com
This app can be used together with Arduino, ESP8266, Raspberry pi and many other modules where you require to send/receive data via WiFi. By pressing an on or off button on the main screen the app will send the data specified in the settings tab to your module. Your Arduino, ESP8266, Raspberry pi can use this data to enable or disable any device like (home) lamps, televisions, modems, camera’s etc.
In the settings tab you can set up a destination IP address and port number to send data after you pressed a button on the main screen. In the settings tab you can predefine the transmitting data corrosponding to a button. After pressing the button the predefined data will be send to your module and can be handled there to activate led’s, lamps, televisions, fan’s or anything your project requires.
If the module sends the same data back to this app the app will detect this and change the status on the mainscreen. This is to make sure your module has a way to confirm the required action is done completely by the module.
Find more info and source code examples at:
http://www.hdhprojects.nl/2018/02/15/android-app-for-remote-control/
Have fun!
